|

PROMATION
offers two different styles of
bare board handling systems.
The EVP style bare board
loading station holds stacks of PCBs (up to 170 pieces) for line loading.
The vacuum head lowers to pick PCBs (from the stack) than raises up and
places the PCB onto a 3 mm edge belt (for transport). SMEMA is enabled
for machine to machine transport.
The ASD style loading
station is a top loading, drop style PCB destacker. This station is
capable of holding up to 80 PCBs (at 1.6 mm thickness), and mechanically
separating the PCBs, placing them onto a 3 mm edge belt for transport.
Both stations are also
equipped with a Pass Through mode. This allows the station to be placed
after a Magazine Line Loader for 2nd side production.
Note: The vacuum style
system may be reconfigured to accept PCBs and re-stack them into a pile.
Click here to
view video
-
Programmable logic
controller with “One Touch” button control panel (both stations)
-
AC drive motor with
fixed belt speed (both stations)
-
Indexing elevator
platform with product height sensing/adjusting (EVP station)
-
Mechanical separator
for destacking station (ASD)
-
Hand dial for width
adjusting (EVP model)
-
Retractable hand
crank for width adjusting (ASD style machine)
-
Vacuum pick up system
with adjustable cups (EVP model only)
-
Audible alarm, 3
color light tower & ESD ground port (both stations)
-
Dual E-Stops and
single Reset (both stations)
-
Easy Roll wheels
w/leveling feet +/- 30 mm (both stations)
Technical
Specifications:
-
3 mm edge contact
-
Pass through
selectable (both stations)
-
Minimum PCB thickness
1 mm (0.045”)
-
Maximum PCB weight
1.8kg (5 lbs)
-
Voltage (USA = 110v)
or (220 v optional)
-
Power consumption: 80
– 86 watts 1A
-
Top side clearance 30
mm (1.1”)
-
Bottom side clearance
30 mm (1.1”)
-
Look up product
sensing (adjustable focal detection)
-
Rail to floor height
(950 mm) 37.4” or (900 mm) 35.4”
Available Options:
|