|
PROMATION’s PCB Debris Removal
System provides in line cleaning of bare PCBs prior to screen printing
or other key processes.
The EDR-700 station houses a special ESD
brush and vacuum system for PCB cleaning. A complete dust collection
through a turbo fan, air blower and particle collection bag are enclosed
underneath the conveyor. The brush has adjustable height allowing the
operator to set to the desired sweeping distance.
An optional Ionizer is available
Features include:
-
Programmable
logic controller
-
“One Touch” button control panel
-
AC drive motor (belts and brush)
-
Adjustable focal length sensors
-
ESD ground port
-
Hand crank for width adjusting
-
Full top cover access (see through)
-
Audible alarm and 3 color light tower
-
Dual E-Stops and single Reset
-
Easy Roll wheels w/leveling feet +/- 30 mm
Technical
Specifications:
-
3 mm edge contact
-
Clean / Pass selector switch
-
Four transport width sizes available
-
Minimum PCB thickness 1 mm (0.045”)
-
Maximum PCB thickness 3 mm (0.140”)
-
Maximum PCB weight 1.8kg (5 lbs)
-
Voltage (USA = 110v) or (220 v optional)
-
Power consumption: 84 – 88 watts 1A
-
Top side clearance 30 mm (1.1”)(Brush
touches)
-
Bottom side clearance 30 mm (1.1”)
-
Rail to floor height (950 mm) 37.4” or (900
mm) 35.4”
Available
Options:
|