|
PROMATION's
inverter station
is used to flip a PCB end for end then deliver the PCB for 2nd
side production. The EIV-700 incorporates a top side board aligner making
set up for width adjusting easy.
The PCB is accepted and
transferred to the end stop. Top and bottom side belt drives are used to
secure the PCB. The carriage unit flips and registers it self. Once home,
the PCB is released to the next process (through SMEMA). The carriage then
returns home to accept the next PCB.
Click here to
view video
- Programmable logic
controller
- AC drive motor(s)
with fixed belt speed
- NORMAL & PASS modes
(selector switch)
- Turn handle for width
adjusting (top aligner)
- ESD grounding plug in
port
- Audible alarm & See
through safety covers
- Dual E-Stops and
single Reset
- Easy Roll wheels
w/leveling feet +/- 30 mm
- One Touch Control
system
Technical
Specifications:
- 3 mm edge contact
dual rail sets
- 4 PCB handling sizes
available
- Minimum PCB thickness
1 mm (0.045)
- Maximum PCB weight
1.8kg (5 lbs)
- Voltage (USA = 110v)
or (220 v optional)
- Power consumption: 68
watts 1A
- Top side clearance 30
mm (1.1)
- Bottom side clearance
30 mm (1.1)
- Look up/down product
sensing (adjustable focal detection)
- Rail to floor height
(950 mm) 37.4 or (900 mm) 35.4
- 71 PSI filtered air
(5 bars) (6 mm coupling)
Available
Options:
- touch screen
- variable speed dial
- bi-directional
operation
- automatic width
adjustment
|
