Our ENB station is designed to sort product from either an AOI or TEST station. The station includes a single removable magazine that can hold up to 50 PCBs (at 10 mm pitch) that FAIL the inspection or test process. This in-line solution is perfect for off line rework of suspect product. When the magazine is full, a platform shuttles out of the station to allow the operator ergonomic access to the magazine.

Our EMB station is a full featured magazine handling system that is available with a rear buffer station, allowing the station to hold up to 5 magazines at any one time. Like the ENB station, the EMB station can sort PASS/FAIL decisions. However this station is also programmable that enables it to be a Line Loader, Line Unloader, PASS through conveyor, or AOI/TEST sorting station. Magazines with repaired product may be reinserted into this station to allow for continued process flow through the remainder of the line.

     Standard features include:

• Programmable logic controller

• “One Touch” button control panel

• AC drive motor(s)

• Variable transport speed

• Four vertical bars with dual ball screw platform

• Adjustable focal length sensors

• Magazine clamping and sensing

• Hand crank for width adjusting

• Audible alarm and 3 color light tower

• Dual E-Stops and single Reset

• Easy Roll wheels w/leveling feet +/- 30 mm

Technical Specifications:

• 3 mm edge contact (others available)

• Four transport width size machines

• Minimum PCB thickness 1 mm (0.045”)

• Maximum PCB thickness 3 mm (0.140”)

• Maximum PCB weight 1.8kg (5 lbs)

• Voltage (USA = 110v) or (220 v optional)

• Power consumption: 70 – 82 watts 1A

• Top side clearance 30 mm (1.1”)

• Bottom side clearance 30 mm (1.1”)

• Rail to floor height (950 mm) 37.4” or (900 mm) 35.4”

Available Options:

• Touch panel

• Fully automatic width adjustment

• 4 and 5 rack buffering (rear of station)

• Right to Left movement

PROMATION also sells CAB and NIKKO magazines